This torch is ideal for multi-function welders which have TIG lift capabilities, can also be used on MMA inverter welders for scratch TIG. The gas hose is attached directly to your regulator independent of your welder, comes with a 3/8" BSP fitting which is standard fit for most regulators.
Can also be used as a high frequency TIG torch with the 2 pin plug to operate the trigger switch. NOTE: For TIG lift/scratch you don't attach the 2 pin plug.
SPECS
- Multi-purpose torch for HF TIG, TIG lift and scratch start welders
- Flexible torch head can be adjusted to better position for welding
- Torch model: WP17VF
- Dinse power plug: 10/25
- Gas connector: 3/8" BSP
- Gas hose OD: 8mm
- Gas valve on neck
- Air cooled cable
- Rated current: 200A
- Torch cable length: 4m
- Additional Gas hose length: 30cm
- Ideal replacement for worn-out/damaged torches
PACKAGE
TIG torch
2x Ceramic cup #5 and #6
2x Collet 1.6mm and 2.4mm
2x Collet body 1.6mm and 2.4mm
1x Long back cap
1x Short back cap
NOTE: TUNGSTEN TIPS NOT INCLUDED BUT WE SELL IN OUR STORE