- Gas pressure/flow regulator for use with bottles of Argon, CO2, Nitrogen and Mix. Ideal for MIG/TIG gas welding bottles, Hobbyweld, Argoshield, Pub gas and Fire extinguishers.
- Fully adjustable dual gauge to measure pressure of gas remaining in bottle and flow rate.
- Suitable for gas bottles up to 230bar (3300psi)
- Max. output pressure: 10bar (150psi)
- Max. flow rate: 20 l/min (42 cf/h)
- Inlet mode: Rear entry
- Outlet: 8mm barb tail (Male Reg. fixed not removable, Female Reg. removable)
- Material: Brass
- Inbuilt impurity filter on inlet connector
- Dial diameter: 50mm
NOTE: VALVE TAP FOR FEMALE REG IS BLACK AND FOR MALE REG IS GREY (SAME AS PHOTOS)
WHAT TO CHOOSE
- For Argon or Nitrogen pure and mix heavy choose male regulator with G5/8 fitting
- For CO2 pure and mix heavy choose female regulator with W21.8 fitting
- Fully adjustable dual gauge to measure pressure of gas remaining in bottle and flow rate.
- Suitable for gas bottles up to 230bar (3300psi)
- Max. output pressure: 10bar (150psi)
- Max. flow rate: 20 l/min (42 cf/h)
- Inlet mode: Rear entry
- Outlet: 8mm barb tail (Male Reg. fixed not removable, Female Reg. removable)
- Material: Brass
- Inbuilt impurity filter on inlet connector
- Dial diameter: 50mm
NOTE: VALVE TAP FOR FEMALE REG IS BLACK AND FOR MALE REG IS GREY (SAME AS PHOTOS)
WHAT TO CHOOSE
- For Argon or Nitrogen pure and mix heavy choose male regulator with G5/8 fitting
- For CO2 pure and mix heavy choose female regulator with W21.8 fitting